Welder 2 - ASME Certified

NOW HIRING: Millerbernd Manufacturing is looking for a Welder 2 to join our Circular Products (CP) team in Sauk Rapids, MN as we are expanding our Sauk Rapids footprint. A Welder 2 is responsible for performing MIG welding, layout, tacking, fabrication and building functions in the manufacture of various products in accordance with product specifications. Other combinations of formal training and experience will be considered. Successful completion of internal welding test is mandatory. 

Millerbernd Manufacturing Company is an AWS (American Welding Society) Sustaining Company Member.

Job Title: Welder 2
Location: Sauk Rapids, MN
Salary Range: $25.50 – 30.00 per hour (Non-Exempt)
(In compliance with Minnesota Pay Transparency Law, this range reflects the anticipated compensation for this role. Actual pay may vary based on experience, education, and other factors.)
Shift Schedule: 1st shift: Monday – Friday 7am – 3pm OR 2nd shift: Monday - Thursday 3pm - 1am
Shift Differential: 1st shift - N/A, 2nd shift - $1.50/hour

As a Welder 2, you will:

• Perform the following GMAW welds – butt – V – single bevel and fillet welds on carbon steel
• Produce welds that pass visual inspection
• Can perform necessary repairs that pass adhere to MMC Welding Procedure Specifications (WPS) and CWI inspection requirements 
• Demonstrates the ability to weld the above weld joints with either .045 and/or .062 diameter wires
• Read and understand Millerbernd's WPS’s – select appropriate wire and shielding gas and weld within WPS weld parameters
• Proficient in print reading and understands weld symbols and welding gauges  
• Can perform welds using following wire – solid – flux core and metal core as needed.
• Can weld carbon, stainless steel as needed
• Perform carbon arc gouging and recognize when any and all defects have been removed
• Layout and tack to specifications
• Use grinder or other appropriate tools to clean, smooth out, grind or finish parts as needed
• Use various machines to fabricate, build, and design products. 
• Monitor the production board and internal paperwork to perform tasks in the designated sequence
• Accurately label all parts for routing to next operation
• Performs prescribed preventative maintenance on machines as required
• Enter job data in production tracking system
• Use crane, hoist, forklift or other material handling equipment to transport materials and product into and out of the work area as required
• Must be AWS GMAW certified
  • Welders employed with Millerbernd will have the opportunity to complete all weld certification requirements including AWS certification within 14 days of employment – up to 3 attempts
  • Welders employed with Circular Products-Sauk Rapids location are required to obtain and maintain ASME certification requirements
• Ensure use of safe work procedures and wear all required PPE
• Perform work at the appropriate pace to maintain quality and productivity requirements 

 Role Qualifications as a Welder 2: 

• Preferred candidates will have 3 years’ experience in metal fabrication/welding experience
  • Successful completion of internal welding test is mandatory.
• Proficient knowledge in interpreting blueprints, mechanical drawings, and weld symbols
• Ability to operate hoists, cranes, and other powered industrial vehicles as needed
• Ability to operate various power and hand tools
• Experience in use of weld positioners, turners, fixtures and equipment
• Ability to perform basic shop math functions
• Ability to electronically record production information
• Ability to read and understand required internal manufacturing paperwork
• Ability to work with others as part of a high-performance team
• Ability to adapt to changing work priorities 
• Able to work under limited supervision using standardized practices and/or procedures
• Accurately use tape measure and precision measuring instruments
• Operational knowledge of Electric Plasma and Acetylene Torch 
• Proficient in welding techniques on flat, vertical and rotating planes 

Physical Demands: 

This position requires the individual to wear and work in company-provided personal protective equipment (PPE). This position requires that the individual can lift a minimum of 50lbs. And, if applicable, can maneuver large, cumbersome equipment with the use of an overhead crane and/or forklift. Must be able to work in, on, or around equipment and machinery. The employee may need to perform work with the use of ladders. 

The physical demands described here are representative of those that must be met during a pre-employment Physical Work Screening (PWS). A reasonable accommodation may be provided to enable individuals with disabilities to perform the essential functions.

Join Millerbernd Manufacturing – Where Your Career Can Take Shape

About Us: At Millerbernd, we don’t just offer jobs—we build careers. We're dedicated to creating meaningful opportunities where you can unlock your potential, turn ideas into action, and be part of a skilled, diverse, and driven team. From day one, you’ll experience a supportive and dynamic environment designed to help you grow and succeed.

What We Offer:

Comprehensive Benefits

• Medical, Dental & Vision Insurance – Two medical plan options, with company HSA contributions
• Health & Flexible Spending Accounts (HSA/FSA) – For medical and dependent care expenses
• Life & Disability Insurance – Company-paid basic life, AD&D, and short-/long-term disability
• Voluntary Benefits – Including optional life, legal & ID protection, accident & critical illness insurance

Financial Security

• 401(k) with 4% Match – Immediate vesting
• Incentive Pay – Performance-based bonus programs depending on your role and shift 
  • This role is eligible for participation in the company’s “Short-Term Incentive Plan (STIP)”, a financial performance-based bonus program
  • Payouts are determined by the company’s operational results and are distributed in the first quarter of the subsequent year

Work-Life Balance

• Accrual Paid Time Off (PTO) and Paid Holidays
• Tuition Reimbursement – Up to $5,250/year for job-related education
• Employee Assistance Program (EAP) – Free, confidential support services
• Onsite Training – Includes leadership, welding, and language courses
• Uniform Subsidy – For eligible roles

Benefits available to employees working 30+ hours/week. 401(k) available to all employees.

What to Expect from the Hiring Process

1. Submit Your Application – Our internal Talent Acquisition Team personally reviews every application
2. Phone Interview – If your background aligns with the role, we’ll reach out for an introductory call
3. Onsite Interview & Facility Tour – Get a firsthand look at what it's like to work at Millerbernd
4. Follow-Up & Offer – Stay informed throughout the process; most decisions are made within 3–10 business days

We're an Equal Opportunity Employer

Millerbernd Manufacturing Company is committed to fostering a diverse and inclusive workplace. We encourage individuals of all backgrounds to apply.

Applicants must be authorized to work in the U.S. We are unable to sponsor or assume sponsorship of employment visas at this time.

Ready to shape your future with us?
Apply today and discover what’s possible at Millerbernd.

#LI-DNI