Xbattery
Website:
xbattery.energy
Job details:
Role Summary
Xbattery is looking for an Installation & Commissioning Engineer to make sure every battery pack is
installed safely, correctly and to specification at customer sites. You will also solve post-installation
problems down to root cause, train partner engineers and electricians, and use CAD to help make our
packs smaller and better.
Key Responsibilities
• Install and commission battery packs at customer locations.
• Analyse requirements and infrastructure at each site: space, ventilation, load profile, existing inverter,
PV and grid setup, and earthing.
• Carry out load calculations, circuit design and cable sizing; specify wire harnessing and protection
(MCB/MCCB, fuses, SPD).
• Train engineers and electricians on installation and commissioning procedures; create SOPs and
checklists.
• Troubleshoot after installation and drive every issue to its root cause (RCA/8D), then feed findings
back into product, process and training.
• Support new product development in CAD, focusing on design optimisation such as reducing battery
pack size, improving thermal behaviour and simplifying assembly.
• Integrate battery packs with inverters, BMS communication, telemetry, PV and grid infrastructure.
Required Skills & Domain Knowledge
• Electrical: AC and DC fundamentals, ACDB and DCDB, MCB/MCCB/isolators, SPDs, earthing,
busbars, lugs and crimping, cable sizing and voltage drop, single-line diagrams.
• Battery systems: LFP and NMC behaviour, series/parallel configurations, BMS protections,
SoC/SoH, charge and discharge limits, thermal management.
• Integration: inverter compatibility (e.g. Victron, Growatt, Luminous, Sungrow), CAN, RS485 and
Modbus communication, telemetry and IoT gateways, PV and MPPT sizing, grid-tie and off-grid
modes.
• Tools: multimeter, clamp meter, insulation tester, earth tester, thermal camera and BMS diagnostic
software.
• Mechanical and design: CAD modelling (SolidWorks, AutoCAD, Creo or similar), DFM/DFA,
tolerancing, enclosure and mounting design, heat dissipation, weight and volume optimisation.
• Safety: LOTO, PPE, working at height, handling high-voltage DC and fire safety for lithium systems.
Qualifications & Experience
• B.E./B.Tech or Diploma in Electrical, Electronics or Mechanical Engineering.
• 2–5 years in installation, commissioning or field service of batteries, UPS, inverters, solar or EV
systems.
• Hands-on CAD experience and the ability to produce a manufacturable drawing.
• Strong analytical skills with a documented example of finding a real root cause.
• Comfortable with field work and customer interaction; able to train others clearly.
• Willingness to travel to customer sites.
Click on Apply to know more.