GiftdMinds
Website:
giftdminds.com
Job details:
Role : Full Time, Onsite (Bangalore)
Experience Required : Interns and Freshers/Recent Grads (Electronics, Mechatronics, Robotics and Aerospace Engineers - Full Stack : Hardware + Software) with 0-2Yrs hands-on experience.
How To Apply :
- Email your resume to HR@giftdminds.com along with a GDrive link that contains pictures and videos of all our past hardware projects (Fusions 3D design, PCB Designs, IOT projects, Drone builds etc)
- Select which track you are more excited to be part of (and show us the hands-on skills abd experience you have that makes you a perfect candidate for that track)
- Any National and International level Rocketry, UAV, CubeSat, Formula Automotive competition participation and wins will highly increate your probability of selection so dont forget to mention that
- In your email mention the following :
- Earliest possible date you can join (we will give preference to candidates who can join immediately or just within few weeks)
- If you are seeking internship, what's the duration of that internship you are looking for
Must Have Hands-on Skills (do not apply if you don't have the below skills, resume will not been reviewed)
- At least 100+ hours of 3D Design (Fusion preferably) & 3D Printing (FDM) experience
- IOT and Embedded (Arduino & Sensors, STM boards, LoRA, GSM/GPS, IMUs etc)
- PCB Design and Fabrication hands-on skills
What we'll be building at GiftdMinds currently. The selected candidate will be working on one of these based on his/her skill-set level, hands-on experience and knowledge depth.
1. In house 3DPrinter with 3D Laser cutting swappable rig
2. 12 inch, collapsible, Dobsonian Telescope with automated star tracker
3. RC Plane with FPV + Head tracking camera control
4. Autonomous Unmanned Underwater Vehicle UUV / ROV (Submarine) and Swarm Drones
5. A Disney BDX droid like bipedal Robot (MicroDuck)
6. A solid motor amateur (COTS and SRAD), sounding Rocket with target apogee of 10Kms
7. A Radio and Satellite communication Ground station for HAM Radio, geo-stationary, FM satellites, International Space Station (ISS) and Radio Astronomy
Key Responsibilities (Research & Development - Engineering) :
Hardware R&D & Rapid Prototyping (MUST HAVE - ALL TRACKS)
- Hands-on experience in Core electronics, embedded systems and firmware development (STM32, ESP32, IOT Sensors)
- Assist in wiring, testing, and integrating microcontrollers, power systems, drivers, and sensors.
- 2 and 3 Layer PCB prototyping skills (EasyEDA or KiCad)
- Using 3D Design and 3D Printing skills for rapid prototype development
1. Track Robotics : Robotics, Control Systems and Simulation
- Implement and tune PID and model-based controllers for robotic actuation.
- Work with simulators such as Gazebo, Webots, Isaac Sim, or custom simulation environments.
- Perform kinematic, dynamic, and structural analysis to validate designs.
- Implement ROS1/ROS2 nodes, topics, services, and actions.
- Integrate sensors (IMUs, encoders, force sensors, cameras) and actuators (servos, BLDCs, ESCs, linear actuators).
- Develop URDF/SRDF models and integrate them into simulation.
2. Track UAV & ROVs:
- 𝐀𝐜𝐭𝐮𝐚𝐥 𝐟𝐥𝐢𝐠𝐡𝐭 𝐬𝐤𝐢𝐥𝐥 — DGCA Remote Pilot Certificate, OR 50+ genuine flying hours you can demonstrate. We will ask you to fly.
- Hands-on building of quadcopters / multirotors from the frame up
- Deep working knowledge of flight controllers (Pixhawk, SpeedyBee, Cube, etc.), ESCs, power distribution boards, and telemetry systems.
- Drone calibration, tuning, and ground station setup (Mission Planner / QGroundControl)
- Comfortable with ArduPilot / PX4 / Betaflight / INAV and MAVLink.
- Experience with building and flying RC Planes (Aeromodelling)
3. Track Aerospace : Amateur Rocketry & SatComm
- As a head of subsystems in your college amateur rocketry team - your hands-on knowledge and experience in Propulsion / Aero-structures / Avionics / Payload & Recovery shall be utilised to help GiftdMinds build it's own 3K and 10K sounding rockets (COTS + SRAD)
- Hands-on experience with RF circuitry and components design and testing, Oscilloscopes, Spectrum Analysers, Signal Generators and VNAs
- Preferred : Hands-on Experience as a Licensed Amateur HAM Radio operator with HF, VHF and UHF radio (HAMSATs) and satellite communication (AMSATs)
- Good To Have : Stargazing and Visual Astronomy - Hands-on experience with Newtonian, Dobsonian Reflective Telescopes, Astrophotography
Impact - Make In India, Viksit Bharat Mission, Future Innovators
All GiftdMinds Engineers dedicate 15-20% of time and effort mentoring some of the brightest young minds - GiftdMinds students (age 10-15yrs) with hands-on advanced R&D research and practical skill development in the field of Space-Tech, UAVs, Mechatronics, Robotics, EVs and beyond.
About GiftdMinds :
GiftdMinds Learning Pvt. Ltd. is recognised by NASSCOM Center Of Excellence as one of the emerging Product R&D X EdTech startups based out of Bangalore, India.
Our product R&D team works on products in the field of Aerospace, Rocketry, Satellite Communications, Robotics and EVs that could be game changer and could lay the foundation of our ViksitBharat@2047 Mission
Our state of the art GiftMinds R&D infrastructure also helps young adults build a solid hands-on foundation that can provide a launchpad for their passion for Rockets, Satellites, UAVs, Robotics and more...
We are a bootstrapped, revenue generating, self sustainable startup currently on a fast-pace, high growth trajectory.
More about GiftdMinds :
LinkedIn : https://www.linkedin.com/company/giftdminds/
Instagram : https://www.instagram.com/giftd_minds/
Facebook : https://www.facebook.com/giftdminds
GiftdMinds Website : https://www.GiftdMinds.com
Click on Apply to know more.